Safe Cleaning Products For Marble

Safe Cleaning Products for Marble Surfaces

Marble Renovations Initial Thoughts

Cleaning marble surfaces can be a daunting task. Not only is it important to use the right cleaning products, but you also need to be careful not to damage the surface.

In this article, we will discuss the safest cleaning products for marble surfaces. We’ll also provide some tips on how to clean your marble properly. Keep reading for more information!

Marble floors, walls, and marble countertops are a long-term investment that must be protected. Use these marble surface care tips to keep it looking lovely.

Safest Cleaning Products For Marble Surfaces

Top Marble Cleaning Tips

Preventative measures. When you have guests over, use coasters under all glasses, especially if they contain alcohol or citrus juice. This will protect your furniture from getting wet or stained. You can also place hot dishes on trivets to avoid damaging your table or countertop.

Protect against grit. Frequently mop your marble floors with a clean, non-treated dry dust mop. Place slip-resistant mats or area rugs within and outside the entrances to keep tracked-in dirt at bay. If you’re using a vacuum on marble flooring, be sure that the attachments and wheels are in perfect working order; worn equipment might scratch the marble floors.

Clean up spills. If you spill something, blot it with a paper towel instead of wiping it. This will help stop the spill from spreading. Then, flush the area with a mix of water and mild dishwashing soap. Rinse it several times to clean it. Dry the area thoroughly with a soft cloth. If necessary, repeat these steps.

Don’t use harsh cleaners. Never use abrasive scrubbers or rough-woven fabric on marble. Avoid products containing lemon juice, vinegar, or other acidic substances that will dull or etch marble surfaces. Stay clear of scouring powders and abrasive creams with traces of hydrofluoric acid (HF); they will harm marble. Simple stone soap and a light stone cleaner will do the trick.

Best Cleaning Products For Marble Surface

Steel Wool

Marble Renovation Rating Icon

Fine steel wool is perfect for removing surface grime like soap scum without damaging your marble surface.

Best Cleaning Product

Best Marble Cleaning Product

By far the best product to clean marble surfaces is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for marble surfaces.

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

Hydrogen Peroxide Ratings

Marble Renovation Rating Icon

Some stains need more that just water. Hydrogen Peroxide can eliminate stains that soap can’t treat. Only use on white marble.

Baking Soda

Best Marble Cleaning Product

If stains penetrate the sealant and get into the porous stone of your countertop, you may have to try to draw them out. The best way to do this is with a baking soda solution.

Microfiber Cloths

Best Marble & Granite Sealer

There are many products in the market but you’ll get the best results with gentle, lint-free microfiber cleaning cloths.

HG Neutral Cleaner

Affiliate Disclosure

Specially developed to clean marble and other natural stone floors regularly, thoroughly & safely.

Safest Cleaning Products For Any Marble Surface

Below is a list of marble-safe products that can be used daily to clean marble countertops, marble floors, and other marble surfaces.

pH Neutral Soap and Water

Warm water and mild dish soap are one of the easiest and most effective ways to keep stone surfaces clean. Avoid cleansers with acidic ingredients like lemon juice or lime, since they can damage your stone surfaces.

When you’re done cleaning your marble surface, it’s a good idea to give them a thorough rinse with clear water to remove soap scum, which might leave a film and dull the shine of the marble surface.

A clean, dry, microfiber towel should be used after cleaning to prevent any water spots from developing and to prevent etching.

Lithofin Easy Clean

Lithofin easy clean is a safe and effective way to clean marble surfaces. This marble cleaner has a pH-neutral formula that will not damage or etch your marble countertop. Additionally, it is gentle enough for daily use and will not strip away the polished finish.

To use, simply spray on the affected area and wipe away with a clean cloth. For best results, use it as part of a regular cleaning routine.

Fine Steel Wool

Fine steel wool is a good option for cleaning marble surfaces because it is gentle and will not damage the stone. Additionally, it can be used to remove stubborn stains or buildup.

To use, simply rub the affected area with the steel wool in a circular motion. Be sure to rinse the area thoroughly when you’re done to remove any residue.

Hydrogen Peroxide

No matter how well you take care of your marble countertops, sometimes you will find stains. If this happens, there are ways to clean them more thoroughly. If the stain is on the marble surface, a solution of 12% hydrogen peroxide can help get rid of it.

Be careful about applying this on darker marble, it may leave white marks on darker natural stone.

Baking Soda Paste

If stains penetrate the sealant and enter the porous stone of your countertop, you may have to try to remove them. A baking soda solution is the most effective way to do so. Simply add water to baking soda until you obtain a thick, creamy texture.

Finally, apply the paste to the discolored area of the countertop, wrap it in plastic wrap, and tape down the edges. Allow up to 24 hours for the paste to work before wiping away with a razor blade and clean away any residue.

You may repeat the procedure if any stains remain. Stubborn organic stains, or cooking oil stains on the other hand, might require expert stone care treatment.

Microfiber Cloths

You also need to use the appropriate tools in order to properly clean your marble counters. Sponges are useful, but microfiber cleaning cloths provide better results.

These high-end rags not only help to remove dirt and germs, but they also absorb more liquid, so you won’t be left with water stains on your polished surfaces.

Microfiber cloths are a good choice for cleaning because they hold up to more use and are gentle on surfaces. They also reduce bacteria.

Top Marble Maintenance Tips

Reasons you can trust Marble Renovation

Final Thoughts On The Safest Cleaning Products For Marble

Marble is a beautiful and popular material for countertops and other surfaces, but it requires special stone care to keep it looking its best.

The good news is that there are stone cleaning products specifically designed for marble that will not damage marble or etch the surface.

Warm water and mild dish soap are always a good option for daily cleaning, and more stubborn stains can be removed with a baking soda paste or hydrogen peroxide.

Be sure to rinse thoroughly and dry with a clean, microfiber cloth after cleaning to prevent water spots. Following these simple tips will help keep your marble surfaces looking like new for years to come.

Don’t forget you can call us anytime if you have any questions or concerns about how to clean your marble surfaces.

How to Clean Quartz Countertops

How to Clean Quartz Countertops: The Right Way

Marble Renovations Initial Thoughts

Maintaining your quartz countertops is a breeze, but there are still some things you need to do to keep them looking their best! In this blog post, we will walk you through how to clean quartz countertops the right way.

We’ll also provide some tips and tricks on how to keep them free from streaks and spills. If you follow our advice, your quartz counters will look amazing for years to come!

How to Clean Quartz Countertops

To get the most out of your quartz countertop, you’ll need to know how to clean it. Quartz worktops are rather low-maintenance; in fact, they’re quite easy to maintain. If you want to keep your kitchen countertops looking new, you’ll need excellent care and maintenance!

Quartz’s resistance to staining, non-porous surface, and durability make it a superior choice for countertops than granite. Despite their toughness, quartz countertops still need some upkeep.

Quartz Countertops Ratings & Best Maintenance Products

Quartz Countertops Ratings

Marble Renovation Rating Icon

With over 35 years experience in the natural stone restoration trade we give Quartz Countertops the below durability ratings.

Hardness
Scratch Resistant
Heat Proof

Best Cleaning Product

Best Marble Cleaning Product

By far the best product to clean Quartz Countertops Countertops is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for Quartz Countertops.

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

How to Clean Quartz Countertops: Daily Routine

Quartz countertops are one of the most maintenance-free worktops on the market, but it’s still good to keep your investment in top shape by using some standard cleaning. A spill must be dealt with as soon as possible.

Wipe the surface of your quartz as soon as possible. The longer a substance is left on the quartz, the more damage it may cause, so clean it fast. Keep it dust-free and crumb-free to avoid damaging the surfaces when you do wipe them. It sounds stupid, but it happens all the time.

Quartz Countertops Top Maintenance Tips

How to Clean Quartz Countertops: Cleaning Tips

Use mild dish soap: Regular cleaning should be performed with a mild soap or detergent, followed by a soft cloth. Make sure the soap does not contain bleach or cause irritation to your quartz countertop surface.

Be gentle: Don’t use harsh chemicals or abrasive materials, as they can damage the surface of your quartz. It’s best to keep to soap and water.

Use a soft cloth: Always use a clean, soft cloth when cleaning your countertop. This will avoid scratches and streaks.

Wipe in the direction of the grain: When you do wipe down your countertop, make sure to do so in the direction of the grain. This will avoid any streaks or smears.

Don’t use harsh chemicals: As we mentioned before, quartz is a rather tough surface, but it can still be damaged by harsh chemicals. Avoid using any cleaning products that contain bleach or other harsh chemicals.

Use coasters: Place coasters under all beverages to prevent any water rings or stains.

Clean spills immediately: Quartz countertops are not stain-proof, despite their stain resistance. As soon as possible, wipe up any liquids. Quartz will resist stains for a short while, but all colored liquids should be removed as soon as possible.

Use fine steel wool (wire wool): If you have a stubborn stain, you can use fine steel wool to remove it. Just be sure to go with the grain and not against it.

Use a cleaner specifically for quartz: You can find cleaners that are made specifically for quartz countertops. These are usually milder than regular cleaning products and will not damage your countertop.

Avoid heat: Quartz is heat resistant, but not heatproof. It is a durable surface but you should avoid putting hot pans or other objects directly on the surface of your quartz countertop. Use a trivet or a cutting board instead.

Reasons you can trust Marble Renovation

Preventing Quartz Countertop Damage

Avoid Extreme Heat: For pans, crockpots, and electric skillets, use hot pads or trivets. Quartz can withstand temperatures up to 300 degrees Fahrenheit but is damaged by rapid fluctuations in temperature. Also known as “thermal shock.”

Use a cutting board: Quartz countertops should not be used with knives. Quartz is scratch resistant, not scratch proof, but it can be harmed if violently struck with a sharp instrument. A cutting board is suggested.

Avoid harsh cleaners: Cleaning with highly acidic or alkaline chemicals, such as nail polish remover, turpentine, oven cleaner, bleach, drain cleaners, dishwasher rinsing agents, and so on should be avoided.

All acidic cleaners are bad for quartz countertops. Clean spills immediately using a mild detergent and water or disinfectant wipes to remove citric acid like lemon juice.

Avoid excessive force on your quartz surfaces: Do not apply pressure or force to your countertops, such as dropping a large pot, because the stone may be chipped or fractured.

Use the right products: It is important to use the right products. See above for our best products that you can use to clean your quartz countertops.

Of course, you can always call us to clean and restore your quartz countertops.

How to remove hard water stains from quartz countertops

Fill a bucket with equal parts warm water and white vinegar.

When cleaning quartz, dip a soft rag into the mixture and wring it out so that it’s damp, not dripping from the warm water.

Rub the stain in a circular motion until it disappears.

Rinse the area with clean water and dry it with a microfiber cloth or sponge.

If the above doesn’t work, mix a paste of baking soda and water. Apply it to the stain with a damp cloth and rub in a circular motion. Let it sit for 15 minutes, then rinse with clean water and dry with a soft cloth. Repeat as necessary.

You can also try using a store-bought hard water stain remover, following the instructions on the bottle. Glass cleaners can sometimes be used on a quartz surface, but check the label before doing so.

Always keep some fine wire wool on hand to remove any tough stains that may pop up on your quartz countertops. You can use fine steel wool or a plastic scraper to gently scrape away any surface grime. Use mild dish soap with a non abrasive sponge or soft rag to clean grease off of your quartz countertops.

Final Thoughts on Cleaning Quartz Countertops

Quartz countertops are beautiful, strong and durable. They are also low maintenance and easy to care for.

However, there are a few things you should avoid doing in order to prevent damage. These include using harsh cleaners, applying excessive force, and exposing the surface to extreme heat.

Always keep some fine wire wool on hand to remove any tough stains that may pop up. With proper care and cleaning, your quartz countertops will last for many years to come.

Don’t forget you can call us anytime if you have any questions or concerns about your natural stone worktops and how to maintain them.

How to Clean Granite Countertops

How to Clean Granite Countertops: A Guide for Everyone

Marble Renovations Initial Thoughts

Granite kitchen countertops are a popular choice for many homeowners. This natural stone is beautiful, resists bacteria and staining, and gives off a lustrous shine. However, just like any other surface in your home, granite requires regular cleaning to keep it looking its best. In this blog post, we will discuss the best ways to clean granite countertops using simple dish soap and water.

how to clean granite countertops

Why use Granite Countertops?

Granite’s versatility makes it an almost must-have in new houses and refurbished kitchens, with its wide range of hues and designs. Granite is highly prized for its beauty and is used for kitchen and bathroom vanity countertops, as well as backsplashes, desktops, fireplace mantels, and even floor tiles. Because granite is naturally resistant to bacterial growth, it’s ideal for both kitchens and bathrooms.

Is Granite Porous?

Granite is a porous natural stone that is very durable. However, granite is porous, so it must be maintained with regular maintenance and cleaning. Granite’s beauty and longevity may be preserved if properly cared for. After installation, the granite is almost always sealed. The stone will need to be resealed every two to four years to maintain its brilliant sheen and prevent difficult-to-remove stains. Resealing should be performed by a professional natural stone restorer.

The best way to clean a granite surface is to utilize the appropriate cleaning products, like baking soda, which may be found in your kitchen.

Granite Ratings & Best Maintenance Products

Granite Countertops Ratings

Marble Renovation Rating Icon

With over 35 years experience in the natural stone restoration trade we give Granite countertops the below durability ratings.

Hardness
Scratch Resistant
Heat Proof

Best Cleaning Product

Best Marble Cleaning Product

By far the best product to clean Granite Countertops is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for Granite.

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

Best Way to Clean Granite Countertops

When cleaning granite, avoid using harsh chemicals, acidic cleansers, or abrasive scrubbing brushes. It’s better to use a little bit of neutral dish soap and water. You can also use a soft sponge or cloth to avoid scratching the surface. Wipe up spills immediately, as they can stain granite if left for too long.

To clean your granite countertops on a daily basis, start by wiping them down with a damp cloth or sponge. If there are any tough stains, you can gently scrub them with a soft-bristled brush and soapy water. Rinse the area with clean water and dry it off with a soft cloth.

Periodically, you should also give your granite countertops a deep clean. To do this, mix equal parts dish soap and warm water in a bowl. Dip a sponge or cloth into the mixture and wring it out so it’s not dripping wet. Gently scrub the surface of your countertop in a circular motion, taking care to avoid any sensitive areas like seams or edges. Rinse the surface with clean water and dry it off with a soft cloth.

How to Care for Granite Countertops

If the countertop is not sealed, or the sealant has worn off, you’ll need to address it right away.

A layer of sealant is applied to all granite countertop installations. The pores in natural stone are sealed with this top layer. Every two to four years, reseal your granite worktops to keep them clean. When it becomes difficult to wipe spills or water droplets don’t bead up anymore it’s time to reseal your counters.

It is possible to reseal granite countertops yourself, but you’ll get better results if you hire a granite professional to do it for you.

Harsh chemicals can damage the sealant on your granite countertops, so it’s important to use mild, pH-neutral cleaners.

For general cleaning, all you need is a little dish soap and water. You can also use a soft sponge or cloth to avoid scratching the surface. Wipe up spills immediately, as they can stain granite if left for too long.

Granite Countertops Top Maintenance Tips

How to Clean Granite Countertops Step by Step Guide

You’re now ready to begin cleaning after you’ve properly sealed the countertop. For the best way to clean granite, use these instructions:

Do not use harsh chemicals, acidic cleaners, or abrasive scrubbing tools: Use warm water, mild dish soap, and a soft microfiber cloth to clean it. Avoid using vinegar, which can dull the granite and weaken the sealant. Also, avoid using abrasive scrubbing tools that might scratch the stone.

Wipe up spills as soon as you can: Granite is less porous than marble, so it absorbs less oil and stains. Nonetheless, you should clean spills as soon as possible with a soft cloth as a basic precaution.

Clean with warm water and a couple of drops of dish soap: Wipe the surface clean with a wet cloth and some soap. Once you’ve cleaned the whole surface, rinse your rag and wipe down the counter using fresh water to remove any soap residue. To avoid spreading food, dirt, or grease around, wring your rag in clean water from time to time. After cleaning with the soap, rinse your towel and wipe again to ensure no soap residue remains on the granite worktop.

Dry the granite countertop: Use a clean microfiber cloth to dry the granite counters after you’re done, or else water spots may develop.

Consider using special granite countertop cleaner: Look for granite countertop cleaning solutions in the cleaning aisles of your grocery store. It’s not necessary to use special cleaners; warm water and soap will suffice—but if you want to use it, this is an option.

Reasons you can trust Marble Renovation

How to Remove Stains from Granite

If you clean your granite countertop on regularly, the majority of the time, it will remain in excellent shape. If you spill something and it leaves a stain, though, you’ll need to do a little more thorough cleaning. Use these suggestions to remove stains from your countertop without harming the natural stone:

Use a baking soda paste: Baking soda can be used to remove just about any liquid that you spilled, whether it’s oil, water, or something else. Regardless of what you spilled, baking soda is likely to help. Make a paste with equal amounts of water and baking soda to clean an oil-based stain. If the problem is a water-based stain, combine hydrogen peroxide.

Apply the paste liberally over the affected area: Using a clean, dry cloth, wipe down the counter after each use. Rinse it thoroughly afterward. Repeat as needed.

Tackle tough stains: Try to avoid over-cleaning. If the stain isn’t removed after repeated scrubbing, reapply the paste and cover the area with plastic wrap before taping down the edges. Leave the homemade stain remover on for at least 8 hours or overnight. Then rinse and dry the granite carefully to see if there is any residue remaining.

Common cleaning products that can do more harm than good

Here is a selection of the worst cleaning products for your granite countertops:

Windex: Windex contains chemicals that can harm your granite’s finish. While Windex’s most common impact is to dull the sheen of kitchen worktops, it may also induce pitting. Windex may cause your granite worktops to lose their sealer and make them prone to staining and other damage.

Bleach: Granite sealers are easily damaged by bleach. Bleach can destroy your countertops’ sealant as well as cause staining due to granite’s permeability.

Lysol Lemon All-Purpose Cleaner: Lysol Lemon All-Purpose Cleaner, which includes both ammonia and lemon, is not a good choice for cleaning granite countertops. The acid in lemons is believed to cause granite countertop sealants to deteriorate. Ammonia can also scratch the surface of your granite and even devour it over time.

All-purpose cleaners are widely regarded as being too aggressive for the sealers used on granite countertops.

Clorox All-Purpose Cleaner with Bleach: This all-purpose cleanser includes harsh chemicals such as bleach. As previously said, bleach can harm granite countertops, making this product unsuitable for usage. The fragrances in this polish may also cause your sealant to erode.

Disinfecting Wipes: All disinfecting wipes are extremely useful for cleaning, but they can cause issues on granite countertops. The citric acid in the wipes is extremely harmful to the sealant used on granite counters.

Pledge Multi-Surface Cleaner: Pledge has a well-known lemony odor, and it is this lemon scent that causes huge issues for granite worktops. The citric acid in this cleaner may harm your countertop sealer, allowing the stone to be damaged.

Windex Multi-Surface with Vinegar: The vinegar in Windex Multi-Surface with Vinegar can cause your granite countertops to become dull and etched. Cleaning your granite counters using vinegar is probably going to do more harm than good. Furthermore, all-purpose cleaners and Windex products are frequently not suited for use on granite worktops.

Although there are a plethora of other damaging granite cleaners on the market, these are some of the most popular products used to clean granite that may have a detrimental influence on the lifespan of your countertops.

Final Thoughts On How to Best Clean Granite Countertops

In conclusion, granite countertops are a beautiful and popular addition to many kitchens. However, they require special care when it comes to cleaning. Avoid using harsh chemicals, acidic cleaners, or abrasive scrubbing tools.

Instead, opt for dish soap and water. With proper care, your granite countertops will last for years to come. Do you have any tips on how to best clean granite countertops? Let us know in the comments below!

Don’t forget you can call us anytime if you have any questions or concerns about how best to look after your natural stone countertops or floors.

Typhoon Bordeaux Granite

Typhoon Bordeaux Granite: A Natural Stone Filled with Texture and Rich Colors Marble Renovations Initial Thoughts Looking for a granite that will add some excitement to your interior design? Look no further than Typhoon Bordeaux Granite. This natural stone is quarried from bedrock in Brazil and is known for its dramatic patterns and deep, wine-stain [...]

Terrazzo Countertop

Terrazzo Countertops: Customizable, Eco-Friendly, and Durable Marble Renovations Initial Thoughts Terrazzo countertops are a popular choice for many homeowners and businesses. They are customizable, eco-friendly, and durable. Terrazzo is made from recycled materials, so it is a sustainable option for those who want to reduce their environmental impact. Additionally, epoxy terrazzo is non-toxic and emits [...]

Granite vs Quartz

Granite vs Quartz: Which is the Best Material for Your Kitchen and Bathroom Countertops? Marble Renovations Initial Thoughts When it comes to bathroom and kitchen countertops, these two materials spark such heated debates as granite vs quartz. Both have their own set of benefits and drawbacks, so how do you decide which is the best [...]

Thassos Marble

Thassos Marble: The Purest White Marble for Luxurious Interiors Marble Renovations Initial Thoughts If you're looking for a luxurious, pure white marble to use in your home décor, Thassos marble is a perfect choice. Named after the small Greek island of Thassos, known for its clear waters and beautiful white sand beaches, this natural stone [...]

Dolomite Countertop

Dolomite Countertop: A Forgotten Gem in the World of Kitchen Countertops Marble Renovations Initial Thoughts When most people think of kitchen countertops, they tend to think of materials like marble and granite. However, the dolomite stone is a lesser known stone option that has been around for just as long as marble and granite. This [...]

Safe Cleaning Products For Marble

Safe Cleaning Products for Marble Surfaces Marble Renovations Initial Thoughts Cleaning marble surfaces can be a daunting task. Not only is it important to use the right cleaning products, but you also need to be careful not to damage the surface. In this article, we will discuss the safest cleaning products for marble surfaces. We'll [...]

How to Remove Hard Water Stains from Granite

How to Remove Hard Water Stains from Granite: A Simple Guide

Marble Renovations Initial Thoughts

If you’ve ever had hard water stains on your granite countertops, you know how frustrating they can be to remove.

Not to worry though – in this guide we will walk you through the simple steps for how to get rid of hard water stains on granite quickly and easily. So read on and say goodbye to those pesky blemishes!

 

How to Remove Hard Water Stains from Granite

What causes hard water stains on granite surfaces?

First, it is important to understand what causes a hard water stain. Hard water is simply water that contains a high concentration of minerals, such as calcium and magnesium. When this water comes into contact with granite (or any other porous surface), it can leave behind unsightly white or brownish stains.

If you have hard water, you know the drill. Water spots and mineral deposits seem to appear out of nowhere, no matter how much elbow grease you put into cleaning your bathroom or kitchen surfaces. Your granite countertops are no exception. Though granite is a durable natural stone, it’s not immune to hard water staining.

Fortunately, you don’t have to call in a professional to get rid of hard water stains on your granite countertops. With a little know-how and the right products, you can easily remove hard water stains from granite at home. Here’s how:

Granite Ratings & Best Maintenance Products

Granite Ratings

Marble Renovation Rating Icon

With over 35 years experience in the natural stone restoration trade we give Granite the below durability ratings.

Hardness
Scratch Resistant
Heat Proof

Best Cleaning Product

Best Marble Cleaning Product

By far the best product to clean Granite Countertops is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for Granite .

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

What kind of hard water stain is it?

First, identify the type of stain you’re dealing with. If the stain is light or superficial, you can usually remove it with a little elbow grease and a gentle cleanser. For tougher stains, you may need to use a stronger cleaning solution.Once you have removed the

Once you’ve determined the type of stain you’re dealing with, it’s time to get started on removal. For light stains, simply mix a mild dish soap with warm water and use a soft cloth to scrub the affected area. If the stain persists, you can try the following:

Fine wire wool and natural stone soap

Break off a bit of fine wire wool, also known as steel wool. Make sure it’s “Fine” wire wool and not the coarse wool, as coarse wire wool could scratch your granite surface.

Then add a small amount of natural stone soap to the effected area. Gently scrub the soap into the area. Then wipe away the mild soap with fresh water and dry with a paper towel. Once dry, buff the area again with the fine wire wool.

Follow the steps below for how to remove hard water stains from granite

Use fine wire wool to remove anything on the surface, like limescale. Make sure the surface is nice and smooth.

Do not use any coarse wire wool as this could scratch the granite.

Massage a small quantity of natural stone soap on the affected area.

Dry off any remaining liquid

Finally buff again using the fine wire wool

Use a plastic scraper or razor blade

Removing hard water stains can be difficult. You should remove any large crusty hard water build-up using a plastic scraper, if necessary you can use a razor blade but make sure you do not scratch the surface, as you will need to call in a professional to remove any scratches from your granite counter.

Once you have removed the hard water deposits from the surface of the granite you can use an old toothbrush or a soft brush with soft bristles in a circular motion over the water stains or water rings.

Granite Top Maintenance Tips

Other solutions for how to remove hard water stains from granite

Keep Your Granite Countertop Clean

The best solution for hard water stains and mineral deposits is to consistently dry any areas that become wet. Wiping up spills on a daily basis with a sponge is the first and most effective method of cleaning your granite countertop or marble countertops.

The majority of house owners wipe spills away every day with mild dish soap and a soapy sponge, which is an excellent place to start. When you have hard water, however, this may result in soap scum being left behind.

Always make sure you wipe away any soapy residue

For this reason, you need to follow up with a rinse to remove any traces of soap scum that could dull the surface. After wiping, though, you also need to dry the surface. Remember, standing water can leave mineral deposits behind that are hard to remove, so wipe up spills immediately and dry the surface with a microfiber cloth to soak up all the water and avoid scratching the sealant.

Reasons you can trust Marble Renovation

Household ingredients

Fortunately, there are a few simple household ingredients that can effectively remove hard water stains from granite counters but you must be careful as anything acidic can actually harm the stone, so make sure you wipe up after yourself and not leave acidic solutions on the surface for long.

Vinegar or lemon juice and water solution

One popular method is to use a solution of equal parts vinegar and water. Simply apply this mixture to the stained area with a clean cloth and scrub gently until the stain fades. Always make sure to clean the solution away as vinegar may also stain if not removed promptly.

Baking powder solution

If you don’t have vinegar on hand, another option is to make a thick paste out of baking soda and water. Again, apply this to the stain and scrub until it disappears.

First, create a paste using baking soda and water. Apply the paste to the hard water stains and let sit for about 15 minutes. Next, wipe away the paste with a damp cloth. Finally, rinse the area with clean water and dry with a soft towel.

You can safely treat stubborn hard water stains on your natural stone countertops with a paste of baking soda and water, despite the fact that it’s not usually a good idea to use abrasive cleansers on them. Simply apply it to the impacted area and scrub it with a soft-bristled brush, then rinse with water and dry with a cloth.

Once you’ve removed the hard water stains, be sure to rinse the area well with clean water and dry it off completely. This will help prevent new stains from forming in the future.

Final Thoughts on How to Remove Hard Water Stains from Granite

Now that you know how to remove hard water stains from granite surfaces, it’s important to keep your countertop clean on a daily basis. Wipe up spills immediately and dry the surface with a microfiber cloth to avoid mineral deposits and hard water stains.

You can also use a natural stone soap and fine steel wool to clean your countertop on a weekly basis. By following these simple tips, you can keep your granite countertop looking like new for years to come.

Don’t forget you can call us anytime if you have any questions or concerns about how best to look after your natural stone countertops or floors.

Dolomite Countertop

Dolomite Countertop: A Forgotten Gem in the World of Kitchen Countertops Marble Renovations Initial Thoughts When most people think of kitchen countertops, they tend to think of materials like marble and granite. However, the dolomite stone is a lesser known stone option that has been around for just as long as marble and granite. This [...]

Safe Cleaning Products For Marble

Safe Cleaning Products for Marble Surfaces Marble Renovations Initial Thoughts Cleaning marble surfaces can be a daunting task. Not only is it important to use the right cleaning products, but you also need to be careful not to damage the surface. In this article, we will discuss the safest cleaning products for marble surfaces. We'll [...]

Golden Jade Granite

Golden Jade Granite Countertops: Pros and Cons Marble Renovations Initial Thoughts Golden Jade Granite is a unique and beautiful type of granite that can be used for countertops in your home. It has a variety of pros and cons that you should be aware of before deciding on whether or not to use it in [...]

How to Clean Quartz Countertops

How to Clean Quartz Countertops: The Right Way Marble Renovations Initial Thoughts Maintaining your quartz countertops is a breeze, but there are still some things you need to do to keep them looking their best! In this blog post, we will walk you through how to clean quartz countertops the right way. We'll also provide [...]

Limestone Countertops

Limestone Countertops: The Pros and Cons Marble Renovations Initial Thoughts If you're considering limestone countertops for your home, it's important to weigh the pros and cons before deciding on this natural stone. On the plus side, limestone is a luxurious stone that can add significant value to your home. It also has a sophisticated appearance [...]

Viscount White Granite

Viscount White Granite: The Perfect Stone for Your Kitchen or Bathroom Marble Renovations Initial Thoughts If you are in the market for a new countertop, Viscount White Granite is a great option to consider. This natural stone features a beautiful appearance of swirls of white, grey, and black hues that will enhance the look of [...]

What are pH levels in cleaning products, and why should you care?

What are pH levels?

pH is a measure of hydrogen concentration in an alkaline or acid solution, on a scale from 0 to 14. Close to 7 is considered pH-neutral, anything closer to the acid end than to the alkali side will be more acidic and anything closer to the alkali end then it will be more alkaline.

The most common way of measuring this in everyday life might be food: lemons and vinegar have a low pH score around 3 while bleach-based cleaners can range between 11 to 13 on this scale.

Why does this matter?

One of the most important ways to keep your home clean is understanding the pH. Solutions with a high degree will be better at removing greases and stains, while low-pH solutions do a better job breaking down minerals. Knowing this factor can help you get your home back in order without having to use as much harsh chemicals.

pH Levels in Cleaning Products

So, any products that are on either side of this scale can be harmful for marble worktops. The best way is to always check your labels before you buy products for cleaning because if they are acidic then it will damage that beautiful surface of yours.

If your kitchen units have been subjected to bleach over time this can cause yellow spots on them, if this has happened you may need a specialist to come and grind the surface with diamond abrasives to remove the staining.

Best Maintenance Products For Stone Surfaces

Best Cleaning Product

Best Marble Cleaning Product

The best product to clean natural stone surfaces is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for natural stone surfaces.

Best Grime Remover

Best Marble & Granite Sealer

Fine wire wool, also know as steel wool, is the best for removing soap scum and grime. This is by far the best for natural stone surfaces.

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

Top Maintenance Tips For Your Stone Surfaces

pH levels of common household cleaning supplies

Chlorine Bleach: pH 11 to 13

Bleach is one of the most corrosive substances on the pH scale that we are able to use. The index for a bleach-based product is between 11 and 13; any more than 12 will require you to wear protective clothing wherever it’s used and always work in a well-ventilated area.

This substance can be dangerous when exposure isn’t monitored appropriately and may damage many types of surfaces, including fabrics; as such, some people choose not to clean with it at all.

On the other hand, because bleach is near one of the extremes of this little measurement tool that ranges from 0 to 14, it does provide an extremely high level of whitening power–significant enough that most stains will disappear following a diligent scrubbing session with bleach.

chlorine bleach pH level 11 to 13

Ammonia: pH 11 to 12

It’s important to note that ammonia has a pH level of approximately 12 and can be corrosive, meaning it needs to be used in an open area with good ventilation. It is also not safe when mixed with other chemicals such as detergents or bleach agents.

Even so, this chemical works wonders on tough dirt and grime making it a formidable cleaner (or toilet bowl cleaner).

liquid-ammonia pH level 11 to 12

Oven Cleaner: pH 11 to 13

Oven cleaners are just as alkaline as ammonia, which helps them cut through grease and grime. Extreme care should be taken, though, when using an oven cleaner at the top of the alkaline scale, as they can easily damage your marble countertops

oven cleaner pH level 11 to 13

Baking Soda: pH 8 to 9

Baking soda is an alkaline substance, but not at the scale needed to make it corrosive.

While baking soda has enough alkalinity to power through grease and dirt (but not enough to do so with ease), it may be a great option for many surfaces in your home because it’s not too powerful.

baking soda pH level 8 to 9

Mild Dish Soap: pH 7 to 8

(Neutral Cleaner Like Fairy Washing Up Liquid)

Mild dish soap, like Fairy washing up liquid, typically has a pH level of around 7, making it a perfect all-purpose cleaner for any surface.

If your dish soap is labeled “mild,” great for hands, or gentle on surfaces, it likely has a pH level of around 7 and will work well throughout the home.

mild dish soap pH level 7 to 8

Stone Cleaner: pH 7 to 10

Most stone cleaners are standardized to be around a 7 in terms of their pH level. Some can range up to 10, so those with sensitive surfaces should be cautious when buying products.

stone cleaner pH level 7 to 10

Vinegar: pH 3

Vinegar, which has a pH of around 3, is acidic and can be used to remove mineral deposits. But many people mistakenly believe that vinegar should always be diluted or avoided when cleaning certain surfaces because it’s acid-based.

It should not be used on stone, marble or hardwood floors because these types of surfaces could suffer permanent damage from an acid cleaner like vinegar.

vinegar pH level 3

Lemon Juice: pH 3

Lemons and vinegar are acidic cleaners. While there are many surfaces, like copper pots and drains, which benefit from the cleaning and fresh lemony smell of these cleaners, it’s best that you exercise caution with them on stone or grout surfaces.

lemon juice pH level 3

Reasons you can trust Marble Renovation

Final Thoughts on pH Levels in Cleaning Products

How to lower the risk of stains and discoloration on your marble countertops

For everyday cleaning you want to avoid substances with high pH levels which can cause etching in your counters including bleach based cleaners, dish soap as well any acidic substance such as lemon or vinegar. You should also use natural products instead of synthetic ones that are harsher on marble surfaces like ammonia or alcohol based products (such as window cleaner).

The best way to clean your marble countertop

When it comes time for regular kitchen maintenance, be sure not to use abrasive materials when scrubbing down counters so they don’t get scratched or damaged; good options include sponges or soft cloths.

Ways you can prevent damage to your marble countertop

Your counters are at risk of stains and scratches in areas like edges where they may be exposed to splatters or contact with other kitchen items such as cookware (think spatulas). To avoid these things it’s important to regularly apply a coat of lithofin stain stop which helps protect the pores from absorbing moisture and in turn, staining your marble. Tips for maintaining your counters with regular cleaning and routine maintenance such as polishing, sealing, or applying a coat of lithofin every now and then. Regularly clean up spills promptly using an absorbent material; when scrubbing down surfaces use soft sponges rather than abrasive materials, which can scratch the surface.

Why you should never use Viakal limescale remover on Marble

Why You Shouldn’t Use Viakal Limescale Remover on Marble

Marble is a beautiful stone that is used for many different things. It’s in your home, it’s in your office, and even on the streets of some towns. This article will talk about why you should not use Viakal limescale remover spray on marble. Marble can easily burn from using this product which leaves horrible white stains that are hard to get rid of without grinding down the surface with diamond pads until all traces have been removed. The only way to avoid this problem is by using a professional marble cleaner who has years of experience removing viakal marks from shower walls and bathroom floors.

This article will answer the following questions:

Why does Viakal stain marble? How do I remove limescale without using Viakal? How to remove Viakal stains. How do I protect the marble effectively after you have removed the stain? What is Viakal? is it safe to leave it on overnight? and what Viakal is used for.

never use viakal on marble

Best Cleaning & Maintenance Products For Natural Stone

Never Use Viakal on Stone

Do not use Viakal on Stone

With over 35 years experience in the natural stone restoration trade we give Viakal Limescale Remover the below ratings.

Acidity (beware)
Will it Etch Stone? (beware)

Best Cleaning Product

Best Marble Cleaning Product

By far the best product to clean natural stone surfaces is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for sealing those pores.

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

Viakal Marble Bathroom Stains

We’ve been working for many years in the marble industry and worked on all types of natural stone, however, the one job we most work on tends to be the removal of Viakal stains from marble showers. It’s caused when using Viakal to remove limescale around taps and showerheads. If you are not careful when cleaning these, the Viakal can easily stain the marble in your bathroom or shower.

Many cleaners tend to leave the Viakal limescale remover spray on the surface to eat away at the limescale, but unfortunately it also eats away at the marble too. The good news is that we have seen a lot of success in removing Viakal stains from marble and the end result usually looks very close to new. But you will need to call in a professional for this type of job because it does require special tools and expertise.

If you’re a homeowner, then don’t worry! We offer our professional services to homeowners on all budgets and with no obligation quotations that can be discussed over the phone or via email before any work commences.

Viakal Marble Shower Stain Removal

Why does Viakal stain marble?

As you can see from the Viakal safety data sheet below, Viakal has 3 types of acid in it, Formic acid, Deceth-8, and Citric acid, none of which are very good for marble as you can imagine.

These acids are designed to breakaway limescale, the problem is, it also burns, or etches into the marble, leaving pale white burn marks. These can look terrible and almost unsolvable! However, there is a way to remove these Viakal marble shower stains. This is because marble has a very high water absorption rate which means that the acid can penetrate deep into the pores of your marble, causing more damage than usual.

What are my options? How do I remove limescale without affecting the marble?

There are many good sprays at removing limescale, but none that are good on natural stone tiles. If you need to remove limescale from your shower walls or bathroom floor then there are two ways:

  1. The easiest way is using fine wire wool to remove the limescale from the surface.

  2. If the wire wool alone doesn’t work, use natural stone soap to help eat away at the limescale before using the fine wire wool to break up the limescale

Top Maintenance Tips

Viakal stain marble shower removal

How to safely remove Viakal bathroom stains

To remove the Viakal limescale remover spray burn marks on marble shower tiles, we use a diamond pad to grind away and polish up until all stains are removed. We tend to use around 4-5 pads for this process depending how badly stained your walls may be. Once it is done you can seal the wall with an acid resistant primer that will protect any remaining tile from future damage!

Depending on how badly stained the marble tiles are in the shower wall, we use a more abrasive pad until the stains are removed. We then move onto a finer diamond pad until the wall is completely honed and sealed. We tend to use between 4 or 5 pads to ensure all the Viakal stains have been removed from the shower walls. Once the wall has been repaired, we will grind back to its original color and seal and polish it so that the area looks new.

Viakal Limescale – Viakal is a type of limescale remover used primarily to remove hard water stains from around taps and showerheads. It’s acidic in nature, so if you’re not careful it can easily stain the surface on which it has been applied. The good news is that we have seen success with removing Viakal stains from marble, but we would recommend contacting a professional if you are not sure how to go about it.

Marble Cleaners and Polishers London
Concrete kitchen wokrtop Restoration
David & Andrew Smith. Marble Renovation

How to protect your marble after the removal of Viakal marble shower stains

Once we have removed the Viakal shower stain, it’s important to look after your marble tiles as much as possible. For starters, keep Viakal away! If you want to keep limescale away, it’s important to ensure the bathroom remains as dry as possible. Use a squeegee after you use the shower to dry away any water droplets that may remain on the marble tiles. Only use a neutral detergent (Fairy washing up liquid is an example of a neutral detergent) to help clean the tiles to remove any soaps or liquids that may have splashed onto the walls during your shower.

Can you leave Viakal overnight?

Viakal is designed to be used in the shower, so it’s best not to leave this product on for too long as leaving it longer than a few minutes could cause damage. The manufacturer recommends that if you need to use the product over night then ensure that your marble has been sealed with an acid resistant sealer first.

How long can you leave Viakal on for?

The manufacturer recommends that it is best not to use the product over night, but if you do then ensure that your marble has been sealed beforehand. It should be applied to a dry surface and left alone for up to 20 minutes before rinsing it away with a water jet.

What do you use Viakal for?

Viakal is designed to remove limescale from your bathroom or kitchen surfaces. Do not use it on marble and other natural stone tiles in your home, such as granite or slate, as it contains phosphoric acid which will dissolve the mineral deposits that cause stains on surfaces like these, affecting the natural stone.

What is Viakal?

Viakal is a bathroom cleaner that contains phosphoric acid to dissolve mineral deposits on your bathroom or kitchen tiles. It removes limescale without affecting the surface on these kind of tiles. The product works immediately to remove stains caused by limescale. However, as natrual stone is so soft, products like Viakal will completely burn the surface. Make sure you rinse off all residue with a cloth after using this product with a cloth, even if you are only using it on glass.

Reasons you can trust Marble Renovation

Final Thoughts on Viakal Limescale Remover

Viakal is a very abrasive cleaning product. It should never be used on any natural stone surface. The acid in the product will eat away at the stone and leave a horrible looking white burn mark.

Unfortunately there is no simple option to remove these stains. You must call a professional stone renovation expert. We will need to use diamond pads to sand back the surface until the burn and etch marks have completely disappeared. Then we can hone, seal and polish the area to bring back the natural colours.

Use there products to clean, seal and maintain your marble:

Lithofin Easy Clean – For easy maintenance and to clean away any grime.

Lithofin Easy Clean – This product will seal the pores in your natural stone and prevent water damage. You can use this once a month with a dry cloth.

Fine Steel Wool – This product is excellent for removing any residue that is on your surfaces, like limescale. Only use the “Fine” steel wool, any other grade will be too abrasive and could scratch your stone.

Don’t forget you can call us anytime if you have any questions or concerns about how to remove Viakal Stains from your marble surfaces.

Marble Care: Professional Tips for Cleaning Marble Countertops and Floors

Tips for cleaning marble countertops and floors

Marble is a material that you should take good care of because it’s expensive and delicate. In this article, we will discuss how to properly clean marble using different cleaning solution in order to protect its longevity. We’ll go over top tips for cleaning marble like using natural cleaners, keeping your marble away from water, as well as the tools that are needed to keep your marble looking great!

Marble is durable but also delicate

Marble is a beautiful material, however, as it’s a natural stone, it can be vulnerable to potential damage and scratches, even from something as simple as water! Fortunately, there are some great ways you can care for your marble surfaces and keep them looking their best! One way in particular? Get yourself the right tools so that when accidents happen (like water spills and stains), they’re easy as pie to clean up! Keeping your marble clean is not as simple as it seems. But once you know what to do, maintaining your countertops will be a breeze!

Marble is a beautiful stone that can be found in many homes around the world. This natural stone has been used for centuries and not only does it look great, but it also offers unique benefits. From reducing noise to providing thermal insulation, marble is a versatile material you should consider for your home renovation project.

However, marble needs to be cared for just like any other surface in your home. Scratches or water stains on marble can make a once-beautiful space feel dated and less desirable over time, so regular maintenance is key to keeping this natural beauty looking its best at all times. Here are some professional tips from Marble Renovation on how you can clean marble and look after it’s timeless beauty.

Marble COuntertop

First of all, make sure it is marble?

There are a lot of materials that can look like marble, so it’s important to know what you’re working with before trying to clean anything, like soap scum for example. Once you have verified the material is indeed Marble, there are two options for cleaning: liquid or dry-cleaning. We’ll focus on liquid cleaning as it tends to do a better job. One of the benefits to liquid cleaners is that it removes dirt and grime better than water alone, without being abrasive. There are two types you can use for your marble – one with a pH-neutral cleaner or an acidic only solution (pH levels should never exceed 11)

Marble is very porous

Marble is more porous than other luxury countertop materials like engineered stone or soapstone, so it can be prone to staining and etching (a.k.a light scratching). You’ll want to clean and seal your marble regularly for the best care possible – before you’ve had coffee!

Tips on How to Maintain and Clean Marble Surfaces and Floors

Marble is a beautiful and elegant stone that can be ruined by spills, rust stains, scratches or other damages in the home. Cleaning marble countertops and floors should always involve soap and water in order to get rid of any dirt or stain on the exterior which can prevent an oily buildup from occurring as it ages. This is the best way to keep a marble from becoming faded and protect it from mineral impurities.

Stay away from abrasive chemicals

Here are a few pointers to help you keep your marble surfaces looking their best around the home: Never use abrasive cleaning materials as they can scratch or otherwise damage the surface. For stubborn stains, try using a neutral detergent and water solution then wipe dry and buff our the area with fine wire wool.

Keep water away from Marble

Make sure to always clean up any spilled drinks, even if you’re sweeping or using a vacuum cleaner. The liquid can leave a stain that is difficult remove and spills should be cleaned immediately in order for the marble floors not get damaged by long-term contact with water!

Concrete kitchen wokrtop Restoration

The key to successfully cleaning marble stains is prevention.

Whatever marble stone surfaces you have in your home, whether it’s a marble countertop or marble floors, sealing it every few months will certainly help protect it from water damage. You could also check with whoever provided the stone for their recommendations on sealant products to help prevent stains. For more high traffic surfaces like coffee tables or flooring, invest in some furniture pads so that there’s no damage done from a spill as well as coasters to keep things tidy!

Marble needs to be cleaned and polished regularly in order to prevent water spots from occurring.

Cleaning your marble floor can be a delicate balancing act when it comes to avoiding abrasives and not dragging dirt around. To avoid this, start with the dust mop; you want to make sure that anything on top of the surface is taken care of before moving onto any other methods. It’s also important for routine maintenance that spills are caught quickly if possible so they don’t dry out or cause damage from contact with any materials such as acidity in wine/lemon juice (or vinegar-based cleaners). It may be possible to use a marble polish, although usually this should be applied by a marble professional.

You may need a professional to clean marble the right way!

If you find that the marble cleaning methods mentioned in this article do not get your marble to the standard you need, you may need a marble cleaner to come and have a look at your marble floors. Sometimes soap scum can be hard to remove.

Avoid using abrasives and domestic cleaning materials

The abrasive chemicals in cleaners could have the potential to damage surfaces or stain them permanently. The chemical reactions they cause can also change marble’s colour and make it too sensitive for certain household objects. Bathroom cleaning products are usually filled with harsh, acidic substances that might not be appropriate anywhere else inside your home-and rubbing those corrosives on stones won’t remove any stains anyway! To avoid these issues, you should use a non-abrasive cleaner like vinegar instead of bleach; this is gentle enough even when used as an all purpose cleanser around the house because its acidity levels don’t react chemically with anything except alcohols which we’d probably never put onto our counters anyways!

Know what’s in your marble cleaning products

If you have marble in your home, it is important to know that certain chemicals can damage the stone. Many like to use home ingredients, like baking soda to clean their marble. Some cleaners may be more harmful than others and should never be used on any surface other than granite or limestone. If a cleaner damages the actual sub-surface of your marble then it will not shine as brightly; this means dull patches are visible when light hits them from an angle which they wouldn’t normally do if there was no skinning effect present on these surfaces! You may need a professional marble cleaner to come and have a look at the stains from water damage or other cleaning materials to help remove them.

Cleaning products and lemon juice
marble etching marks. Wine and water

How to fix etching marks on Marble

The reason etching marks appear on marble is because of the acids that are present in our cleaning products and other household items, which some try to fuse together to make a paste. This acid reacts with marble over time to leave dull marks on your marble flooring, which we call etching marks. An easy way to remove these mark is using the finest grade wire wool, gently rub the etching mark in one direction, as if you are polishing it with a cloth. Repeat this process until all of your marble surface is completely free from any trace marks or streaks and enjoy an impeccable shine once more!

How to avoid these types of marks?

There are several ways to avoid etching. One is by using a dry, non-abrasive soft cloth for cleaning your marble floors and see it’s colors sparkle once more! Another way would be invest in the best products that don’t contain ammonia or bleach or hydrogen peroxide like some branded Marble Care spray bottle cleaner which will not cause any damage at all.

Do not use the following products on your marble surface

It’s important to know the correct way of cleaning marble. If you use common cleaners like bleach, ammonia or hydrogen peroxide as it will etch your marble and consequentially need re-polishing. Even dishwashing detergent can etch marble. Granite is usually harder to etch, but you should still be careful what product you use on granite.

Do not use these products!

Marble is a beautiful natural stone with delicate veins of color that makes it pleasing to the eye. Unfortunately, many chemical cleaners and sealer can damage marble so be sure you know which ones not to use! For example, acidic and citrus-based chemicals like vinegar (pH 3), hydrogen peroxide (pH 4), or lemon juice/orange juice mix will etch your expensive marble countertop if they are left on too long. Alkaline products may have higher pH levels but still need caution as any cleaner over ten can cause significant harm. Things like vinegar and baking soda don’t tend to be much use on marble even though they are easily available round the home.

viakal cleaner sports. Tips for Cleaning Marble Countertops and Floors

Keep your marble worktop dry

One of the most important points that many homeowners overlook is drying! The importance in keeping your marble worktops dry cannot be understated. This will prevent damage to it from absorbing moisture, which could leave a surface looking dull if not dried properly after use or deep cleanings. Use a soft cloth or towel removed any leftover dampness to keep it shiny and beautiful for years to come. The same goes for bathroom shower walls, I know its a pain to dry each time you shower but it will eventually pay off in the long run!

Final thoughts on keeping your marble countertops and floors nice and clean

As we’ve seen, Marble is a beautiful natural stone with many benefits and also some downsides. The marble countertops in your kitchen are going to be the central point of focus so it’s advisable that you take good care for them! Remember that water is your enemy! Try and keep your marble countertops as dry as possible. Always keep some fine wire wool with you to buff out those pesky etching marks. Don’t forget to clean marble frequently.

Call us if you have a question!

If you’re looking for a professional marble polish service, please get in touch with us to find out more about our unique marble maintenance process. We provide rates and quotes when requested! Just send us your question or send over a photo of your floor and we’ll do the rest. Call +44 (0)7725 752 660 or email: david.smith@marblerenovation.com

Our friendly and professional technicians will provide you with the best marble care in town, ensuring a long lasting shine. We use diamond pads to grind back any imperfections on your floor for an even more durable surface. We also use water to ensure no airborne marble dust. To keep it looking as good as new we seal and polish every inch of the surface until its glistens like never before!

Give us a call today if want our help maintaining your precious stone floors so they’ll stay at their highest gleaming level possible. Call us if you have a question or a concern or if you need any of the above tips explained in more detail.

Frequently Asked Questions

Can a vacuum cleaner be used to clean a marble floor?

Yes, but, be careful, as some vacuum cleaner brushes can scratch your floor. You need to use a brush attachment that has bristles around the entire perimeter with every other bristle group clipped so it can efficiently move over our marble floor without damaging it.

It uses up some of its usefulness for your sofa in exchange for being able to keep using this specially modified brush attachment forever because you do it once and don’t have to worry about changing brushes again!

How to clean and take care of marble floor

Marble is a beautiful and often expensive type of stone that can be used in many rooms throughout the home. Marble flooring, for example, is usually found in high-traffic areas such as hallways or living rooms.

If you have marble floors at your home, it’s important to know how to clean and maintain them properly. The best way to keep your marble looking its best is with regular cleaning and maintenance. For daily upkeep, make sure you sweep up any debris on the surface before mopping it down with water. If there are spots or stains on the floor, use a cleaner made for marble surfaces – don’t use anything abrasive!

What is the best way to clean Marble floors and grout?

Marble floors in your home or office can be cleaned using a variety of products, but most experts recommend that you call for commercial cleaning services to get the best results. They know which chemicals work well on marble and other difficult surfaces so they won’t damage their surface texture or shine while getting rid of dirt and grime.

Unfortunately, if dirt has penetrated deep into the grout, you will need to re-grout the tiles, as usually a surface clean will not be enough. You could try using hydrogen peroxide or baking soda for cleaning grout.

How to remove rust from marble?

Unfortunately, rust is very difficult to remove. Rust tends to penetrate deep into the marble which discolours the whole tile. If it were only surface we would be able to diamond grind the surface. You could use a poultice, but in our experience this is usually a 50/50, it could actually make the tile worse as it brings the moisture to the surface and may darken the area. We would certainly recommend you call a professional for this.

How to Clean a Marble Fireplace

How To Clean a Marble Fireplace

Marble Renovations Initial Thoughts

The sheer beauty of some Marble can be breathtaking, especially when used for a marble fireplace surround to provide the focal point of a room. From Carrara Marble to Crema Marfil there are hundreds of different types of Marble to choose from.

It’s important to remember that marble is quite an absorbent material so it requires more maintenance and care. Failing to clean your fireplace often enough can lead to the buildup of dust, dirt, or debris which will eventually cause discoloration. The best way to avoid this problem is through regular cleaning and an occasional deep clean.

how to clean a marble fireplace

What is marble?

The term marble is often used to refer to any hard, calcite rock that can be cut or polished. Marble is a type of rock that can be carved or polished to make the interior design even more luxurious. Marble has been valued since antiquity for its sculptural qualities and usage in architectural structures like columns, flooring, ceilings, and furniture.

Marble is a type of rock that comes in many colors and patterns. Some marble stone rocks, such as Carrara marble, are prized for their beauty because they can be cut or polished into intricate designs to create beautiful structures like sculptures. Marble also has been used by builders since antiquity for buildings with great architectural detail and purposeful design features.

Ratings & Best Maintenance Products For Marble Fireplaces

Marble Fireplace Ratings

Marble Renovation Rating Icon

With over 35 years experience in the natural stone restoration trade we give Marble Fireplace Surrounds the below durability ratings.

Hardness
Scratch Resistant
Heat Proof

Best Cleaning Product

Best Marble Cleaning Product

By far the best product to clean marble fireplaces is Lithofin Power Clean. It’s acid free and suitable for all natural stone surfaces.

Best Sealant

Best Marble & Granite Sealer

There are many products in the market designed to seal your natural stone. This is by far the best for marble fireplaces.

Affiliate Disclosure

Affiliate Disclosure

We only recommend products we have used ourselves and are happy to recommend to others. This post contains affiliate links. If you use these links to buy something we may earn a small commission at no extra cost to yourself.

Advice on how to clean a marble fireplace surround

Marble is an amazing material that’s strong and very heat resistant (perfect for marble fireplaces), but with this type of beauty comes some potential frustrations, like stains! Marble can be a very porous substance which is what makes it stain so easily.

If the stain has been left on the surface for a long time the stain will probably have penetrated deep into the marble, in this case, you will need a marble expert to come and have a look at the stains.

However, if the stain is recent, there are techniques for cleaning a marble fireplace, there is no need for a specialist cleaning product, our advice is to use a damp microfiber cloth to remove any excess residue on the surface, always making sure you dry the surface once it’s been wiped. You can also use very fine wire wool to buff away any water spots or light etching.

How to remove smoke burn marks from a marble fireplace?

If your marble fireplace has visible burn marks, it’s usually best for a marble specialist to come and have a look first.

There are some home remedies that you can do, like mixing ammonia and warm water and letting the solution lie on the burn marks for 5 minutes, then scrub the ammonia mix into the burn mark until the burn mark is removed.

You can also make a paste from baking soda and water and let it sit on the burn mark for a few hours (3 minimum) and then wipe it away with a clean damp cloth.

Our professional opinion

However, in our experience, if the marble fireplace surround has burn marks that have penetrated deep within the marble, then you won’t be able to remove these brown stains from your marble fireplace surround.

You can try and use different poultice and cleaning solutions, in addition to things like hydrogen peroxide, however, it is unlikely that these cleaning products will be able to remove a stain that has penetrated so deep. For more information and cleaning tips, feel free to give us a call or drop us an email.

Top Maintenance Tips For Cleaning Marble Fireplace Surrounds

How to remove red wine stains and magic markers from a fireplace?

You should try a poultice to remove the red wine stains and those fine rings they tend to leave behind. It will not work immediately, but it will eventually go away if you keep applying it.

The same applies to magic markers and their ink marks: make a paste of baking soda and water, apply the poultice on the stain (the poultice may need to stay there at least three hours), then wipe the poultice clean with a damp cloth or sponge.

This solution has been proven to be quite effective when removing these types of stains from marble surfaces – so give it a shot!

Additionally, don’t forget about proper maintenance. While this is an important step in prolonging your fireplace’s life span, some people are too busy and lack time due to their hectic schedule.

However, taking good care of your fireplace surround is important in safeguarding your investment. Keeping the hearth clean will help to prevent it from turning black and ugly, which is a sign of neglect!

Can heat crack a marble fireplace?

If your marble fireplace starts to crack, this will not be due to the heat of the fire, but more likely due to the installation of the marble fireplace or the surface around the fireplace is moving.

Marble can certainly be fragile under some circumstances but there is no way it should be cracking due to heat exposure. Marble is specifically used for fireplaces because it is heat resistant.

The best way to clean dirt from a marble fireplace is by gently brushing it with light strokes using an old toothbrush. If there are any hard-to reach areas, you can use the handle of your brush instead (this will get into more difficult places).

It also helps if avoid harsh chemicals and abrasive materials while cleaning the dirt because they could damage or scratch out those precious details in these marble fireplaces.

Reasons you can trust Marble Renovation

How to remove scratches from a marble fireplace?

If the scratches are deep, you will need to call a marble professional, as they will need to sand back the surface with diamond abrasives until the scratch has been fully removed. However, if it’s just a surface scratch you can usually remove them with some soap and warm water, and some polish.

-Take a microfiber towel and wipe the scratch out.

-Use a good quality stone polish or cream, you can find them at your local hardware store. Rub it into the scratch using circular motions until it is gone (or to prevent any further scratches).

And that’s how to clean and remove scratches from marble fireplaces!

How to remove etching marks and rust stains

All you need to do is wet a rag in warm soapy water to clean the surface, then dry buff the area with a microfibre cloth to ensure there is no water. If you have some fine wire wool you can also buff the area with this. You can then use some marble polish to buff the area. If any streaks are left behind just buff away with fine wire wool.

How Does Smoke Impact Your Marble Surround?

When the fire dies down, particles of smoke that were not completely burned settle on surfaces and leave a film. These droplets include small pieces from wood tars in addition to remnants of fuel that didn’t burn during combustion.

It is these droplets as well as cool particles settling after rapid cooling when your fireplace goes out which create those unsightly soot marks you see around marble mantles or even other stone materials used for design elements such as granite countertops throughout homes across America-even if they are situated outside by an outdoor gas grill!

The smoke coming off fires can be classified into two categories: driven versus natural. Driven smoke originates from heat energy/pressure but it has lost its momentum and settled onto rather than rising. Natural smoke is created from the fire itself, and it has not yet risen above its source in a plume of heat.

The sooner you clean the fireplace, the less smoke that you will have to deal with. The natural residue from a gas fire would be much easier to clean than any other type of fireplace for many reasons. For one, it doesn’t exist as droplets on the surface like wood or coal do and can be wiped off without additional effort.

Final Thoughts on How to Clean a Marble Fireplace

In conclusion, smoke, soot and ash are problems for marble. The key to cleaning a fireplace is prevention:

To prevent the accumulation of ashes or coals in your firebox while you enjoy fireside gatherings with family; as long as you look after your marble fireplace surround, and clean it regularly you shouldn’t have to worry too much about the marble staining too much.

To prevent the accumulation of soot, it is best to clean your fireplace and surrounds after every fire. If you don’t have time for a thorough cleaning at least give it a quick buff to remove the soot and dust.

To prevent the accumulation of ash, make sure to clean your fireplace after every fire. The best way is with a soft brush and plenty warm water and remove any surface dust – you can use mild soap if it’s particularly dirty or smoky; just don’t let any soapy residue remain on marble as this will damage its surface over time.

Use these products to keep your marble fireplace clean:

Lithofin Easy Clean – For easy maintenance and to clean away any grime.

Lithofin Easy Clean – This product will seal the pores in your natural stone and prevent water damage. You can use this once a month with a dry cloth.

Fine Steel Wool – This product is excellent for removing any residue that is on your surfaces, like limescale. Only use the “Fine” steel wool, any other grade will be too abrasive and could scratch your stone.

Viakal Stain Removal From Marble Shower

Viakal Marble Bathroom Stains

We’ve been working for many years in the marble industry and worked on all types of natural stone, however, the one job we most work on tends to be the removal of Viakal stains from marble showers. It’s caused when using Viakal to remove limescale around taps and showerheads. If you are not careful when cleaning these, the viakal can easily stain the marble in your bathroom or shower.

Why does Viakal stain marble?

As you can see from the Viakal safety data sheet below, Viakal has 3 types of acid in it, Formic acid, Deceth-8, and Citric acid, none of which are very good for marble.

These acids are designed to breakaway limescale, the problem is, it also burns, or etches into the marble, leaving pale white burn marks. These can look terrible and almost unsolvable! However, there is a way to remove these Viakal marble shower stains.

How to safely remove Viakal bathroom stains

To remove the burn marks caused by Viakal on the marble shower tiles we use a 5-inch diamond pad to grind away the surface. Depending on how badly stained the marble tiles are in the shower wall, we use a more abrasive pad until the stains are removed. We then move onto a finer diamond pad until the wall is completely honed and sealed. We tend to use between 4 or 5 pads to ensure all the Viakal stains have been removed from the shower walls. Once the wall has been ground back to its original colour we seal and polish, bringing the shower wall back to life!

How to protect your marble after the removal of Viakal marble shower stains

Once we have removed the Viakal shower stain, it’s important to look after your marble tiles as much as possible. For starters, keep Viakal away! If you want to keep limescale away, it’s important to ensure the bathroom remains as dry as possible. Use a squeegee after you use the shower to dry away any water droplets that may remain on the marble tiles. Only use a neutral detergent (Fairy washing up liquid is an example of a neutral detergent) to help clean the tiles to remove any soaps or liquids that may have splashed onto the walls during your shower.

Viakal stain marble shower removal

Request A Quote

    Open chat
    Hi there, I'm David. Thanks for visiting our site.
    Feel free to send me a message on my personal WhatsApp. Happy to help..